- Categories
- Education and Communications
- Studying
- Science
- Physics
Download Article
Explore this Article
methods
1Making Aluminum Foil Faraday Cages
2Building Larger Faraday Cages
Other Sections
Video
Tips and Warnings
Related Articles
References
Article Summary
Co-authored byJessie Antonellis-John
Last Updated: November 7, 2022Approved
Download Article
The Faraday cage (or shield), named after Michael Faraday, is a device that is used to protect from electromagnetic radiation. A Faraday cage may be formed by a continuous covering of conductive material, or a mesh of such materials. This creates a shielding effect for any item inside the cage and protects those items from radiation. The effects of the cage can be enhanced by layering conductive and non-conductive layers - this creates a cage within a cage within a cage, providing additional protection without the need of specialised materials. Though it may sound complicated, you can make your own Faraday cage from aluminum foil. You can also make a larger version using a steel trash can.
Things You Should Know
- Wrap up your phone, alternating between layers of plastic wrap and tin foil. This helps you create an easy, DIY Faraday cage.
- Find a metal box or container (like a trashcan) and line the inside with plastic wrap. Throw your phone inside and close the lid.
- To create a more sturdy cage, use adhesives or bolts to keep the lid securely closed.
Method 1
Method 1 of 2:
Making Aluminum Foil Faraday Cages
Download Article
1
Wrap your electronic device in a plastic layer. Wrap your device in plastic wrap, or place it in a plastic bag. This will put a barrier between the device and the conductive aluminum layer. It can also serve as a waterproof layer for extra protection.
- You can wrap the item in cloth to help prevent edges from poking holes in the plastic and/or aluminum layers, though this is not necessary.
2
Cover every inch of the device in aluminum foil. The aluminum foil will act as the conducting layer. There should be no tears or gaps in the foil. Use your hands to mold the foil around the entire device. This is the simplest Faraday cage and should shield your device from low-energy everyday electromagnetic radiations like bluetooth, cellphone signals etc.
- For more protection, you can use more layers of plastic and foil.
- The foil is referred to as a conductive layer. The metal allows radiation to travel along its surface but not through it.[1]
Advertisement
3
Alternate plastic and aluminum foil. You should cover every inch of the device in at least three layers of aluminum. Protection can be maximized by adding plastic layers in between each layer of aluminum foil. This will create alternating layers of conductive and nonconductive materials and shield your device from harmful electromagnetic radiation.
- A Faraday cage is designed to protect devices from an EMP (electromagnetic pulse) blast. This is a high intensity blast of radiation that comes from a weapon or a naturally powerful source (e.g. the sun).[2]
- You can also use a Faraday cage to block a cell phone or radio from getting reception, or prevent your expensive car from being stolen by protecting its (keyless entry) keyfob. In this case, you would need fewer layers since the radiation is much weaker than an EMP blast.
- Adding adhesives like glue between each layer will make your faraday cage more sturdy and permanent, but it will be harder to remove.
Advertisement
Method 2
Method 2 of 2:
Building Larger Faraday Cages
Download Article
1
Find a conductive container. A stainless steel trash can with a tight closing lid will work very well. You can look for other metal containers or boxes. This will serve as a first line of defense against electromagnetic radiation.[3]
2
Line the inside of the container with plastic wrap. Once you have chosen a trash can or another container, line the inside with a layer of plastic wrap. This protects your devices from touching the conductive surfaces of the trash can, and it also provides protection against flooding.[4]
- For added insulation, you can line the inside of the can with cardboard before the plastic layer goes in.
- You can add layers of foil and additional layers of plastic wrap inside to increase the effectiveness of the Faraday cage. More layers will make the cage more effective, even if the layers themselves are thin.
3
Place your devices inside. Once you have lined your trash can, place your devices inside the can. The best practice is to cover each device individually in its own small Faraday cage (such as the simple aluminum foil Faraday cage). You can also purchase a Faraday bag and place the items in that bag. The trash can will serve as an extra layer of protection.[5]
- Once the devices are inside, you can attach the lid with adhesives or bolt it on for a more sturdy cage. It is also wise to tie the cage down to a beam or bolt it to the wall using a metal strap to make your cage a permanent fixture.
Advertisement
Community Q&A
Search
Question
Would copper pots, washtub boilers, etc. make a good Faraday cage?
Community Answer
So long as the containers are conductive and can seal properly, those should work pretty well. These would be able to protect small electronics such as cell phones and the like.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 29Helpful 52
Question
Can I make a Faraday cage for a car's motor?
Mick Johnson
Community Answer
You can, but you are then speaking about mothballing a car because all of the sensitive electronic components need protected. You may wish to look at a bicycle motor if you are mechanically inclined, or perhaps an old, old car or surplus jeep: no electronics. A Model T replica, or an actual, maybe a Willy's or something. Heck a golf cart with a lawn mower engine might be what you like best, or you might just be better off with a horse or a good mule because they can thread their way through the throngs of cars that were turned into boulders. Best wishes either way!
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 65Helpful 79
Question
To make a trashcan Faraday cage, would galvanized cans work the same?
Community Answer
Yes, any conductive metal will work. Silver is the best choice, but very expensive.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 21Helpful 60
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisement
Video
Tips
Do not attempt to use appliances such as freezers or microwaves as a Faraday cage. They do not offer enough protection.[6]
Thanks
Helpful25Not Helpful9
You can use rubber in place of plastic to create insulated layers.
Thanks
Helpful30Not Helpful11
Conductive layers can be made of other conductive materials such as copper, though this will be more expensive.
Thanks
Helpful10Not Helpful10
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!
Advertisement
You Might Also Like
Advertisement
References
- ↑ https://backyardbrains.com/experiments/faraday
- ↑ https://backyardbrains.com/experiments/faraday
- ↑ http://www.survivopedia.com/how-to-build-a-faraday-cage/
- ↑ http://www.survivopedia.com/how-to-build-a-faraday-cage/
- ↑ http://www.survivopedia.com/how-to-build-a-faraday-cage/
- ↑ http://www.pcmag.com/article2/0,2817,2487180,00.asp
About This Article
Co-authored by:
Jessie Antonellis-John
Math and Science Instructor
This article was co-authored by Jessie Antonellis-John. Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications. This article has been viewed 562,730 times.
385 votes - 93%
Co-authors: 13
Updated: November 7, 2022
Views:562,730
Categories: Physics
Article SummaryX
To make a faraday cage, you'll need to cover your electronic device in alternating layers of materials to create a shield around it that will protect it from radiation. Start by wrapping your electronic device in a layer of plastic wrap. Then, cover every inch of the device in aluminum foil to act as a conductive layer. Add additional layers alternating between plastic and aluminum foil until you’ve formed at least 3 layers of aluminum. Use an adhesive like glue between each layer to make the Faraday cage stronger and permanent. Make sure you cover every inch of the device to shield it from harmful electromagnetic radiation. For tips about how to make a Faraday cage in a conductive container, keep reading!
Did this summary help you?
In other languages
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 562,730 times.
Reader Success Stories
Dave Nicholson
Mar 7, 2021
"If you install LED light strips, the foil and plastic containers they come in are excellent EMP protection for your..." more
More reader storiesHide reader stories
Did this article help you?
Advertisement